Housing

Coated Aluminium, connections on the bottom of the housing

without fan

Bracket

Mounting bracket for stationary and mobile applications
RAM-Mount components, to mount it below a vehicle’s ceiling

Dimensions

229 x 280 x 83 mm / 9,02 x 11,02 x 3,27 inches (without bracket and antenna)

Weight

4,8 kg

Display (internal)

Colour-TFT, 10,4", SVGA, 800 x 600 pixel, 230 cd/m²

Colour -TFT, 10,4", SVGA, 800 x 600 pixel, 300 cd/m²*

Colour -TFT, 10,4", VGA, 640 x 480 pixel, 400 cd/m²*

Touch Panel*

Resistive analogue Touch Panel, occupies PS/2 mouseport

3M NFI (Near Field Imaging) Touch-Screen, only with VGA 400 cd/m² Display, occupies one COM Port

System properties

CPU

Pentium III class Via C3 Eden 400MHz or 733MHz

Chipsatz

VIA Twister

RAM

from 128 up to 512 MByte

Sound*

Sound on Board (SoundBlaster 16 compatible), Line-In, Line-Out, connectors on the PCI-slot or COM2 connector plate

Sound with PCI-Soundcard (SoundBlaster 16 compatible) Line-In, Line-Out, Mic-In connectors on the PCI-slot connector plate

Operating systems

DOS, MS-Windows Embedded XP / Embedded NT / 2000, Linux

Mass storage *

CompactFlash

Typ I/II aktual up to 1 GByte

Hard disc

40 GByte (Shock-/Vibration only up to class 7M2)

CD/Floppy/Memory Stick

drive external (via USB), bootable from DOS

Interfaces

Serial

2 interfaces RS 232 (one occupied if NFI Touch Panel option)

one of these optional as RS 422/485 galvanically separated*

USB

2 interfaces USB 1.1 (bootable)

Keyboard / Mouse

Standard 6 pin MiniDIN connector (PS/2-port)
(Mouse occupied if option touch panel is selected)

Ports

Internal Cardbus

1 cardbus port for Type I/II (PCMCIA compatible)

can be used for radio transmission cards
(installation ex works possible)

PCI port*

1 x PCI port 32 bit, Rev. 2.2 compatible for ultra short card
(max. length 141 mm / 5,55 inches)

Network

RJ45

Ethernet card 10/100 MBit/s integrated on the motherboard

Wireless

Radio transmission via PCMCIA or cardbus card e.g. IEEE 802.11b

Power supply unit (internal)

AC power supply unit

110/230VAC, 100W, 50 up to 60Hz

DC power supply unit

24/48VDC, 60W and 100W, galvanically separated
Power drop up to 10VDC is bridgeable for 20 sec.

12VDC, 100W, galvanically separated
Power drop up to 5VDC is bridgeable for 20 sec. at 80 W

Power consumption

typically 30W, max. 60W, with heating option and
100W power supply unit it can be up to 100W, standby 1W

UPS storage battery unit*

24/48VDC and 12VDC power supply with 100W, occoupies PCI port

(internal)

The UPS storage battery unit is destined for short-term power failure and for transportation from one vehicle to another (max. 20 min.)

Features

Brightness control

manual

Power switch

On/Off switch of the device

Automatic switch-off *

Via ignition signal or power switch the operating system is shut down and the device is switched off, otherwise the device is switched off “hard”

Heating *

for operation from -22° F / -30° C, internal fan required
(only with CompactFlash)

Environment-Controller

functions for statistics, configuration and watchdog
(temperature, ignition, back light etc.)

Radio transmissions/ antennas*

several connector kits

Internal keyboard *

keys: F1-F12, 0-9, Dot, Backspace, Arrow keys, ESC, Enter, Page up/down, Home, End, 2 additional keys

External keyboard *

in addition to the internal keyboard applicable

Environmental specifications

Protective class

IP54 / IP65* (with correct assembly of the cable cover)

Certificates

CE/FCC Class A

Operating temperature
(733MHz CPU on request)

32° to +122°F / 0° to +50°C room
-22° to +122°F / -30° to +50°C with heating option

Storage temperature

-4° to + 140°F/ -20° to +60°C
-4° to + 140°F/ -35° to +60°C (with Colour-TFT 10,4” VGA, 400cd/m)

Relative humidity

10% to 90% at 104°F/40°C, non condensing

Vibration

Class 7M3 according to EN 60721-3 (1995)
(Test acceleration 5g effective value, 10-2000Hz)

Shock

Class 7M3 according to EN 60721-3 (1995)
(Test acceleration half sine 30g peak value)

Housing

Coated Aluminium, connections on the bottom of the housing

without fan

Bracket

Mounting bracket for stationary and mobile applications
RAM-Mount components, to mount it below a vehicle’s ceiling

Dimensions

262 x 319 x 99 mm / 10,31 x 12,56 x 3,9 inches (without bracket and antenna)

Weight

5 kg

Display (internal)

Colour-TFT, 12,1", SVGA, 800 x 600 pixel, 300 cd/m²

Colour-TFT, 12,1", XGA, 1024 x 768 pixel, 400 cd/m²*

Touch Panel*

resistive analogue Touch Panel

occupies PS/2 Mouseport

System properties

CPU

Pentium III class Via C3 Eden 400MHz or 733MHz

Chipsatz

VIA Twister

RAM

from 128 up to 512 MByte

Sound*

Sound on Board (SoundBlaster 16 compatible), Line-In, Line-Out, connectors on the PCI-slot or COM2 connector plate

Sound with PCI-Soundcard (SoundBlaster 16 compatible) Line-In, Line-Out, Mic-In connectors on the PCI-slot connector plate

Operating systems

DOS, MS-Windows Embedded XP / Embedded NT / 2000, Linux

Mass storage *

CompactFlash

Typ I/II actual up to 1 GByte

Hard disc

40 GByte (Shock-/Vibration only up to class 7M2)

CD/Floppy/Memory Stick

drive external (via USB), bootable from DOS

Interfaces

Serial

2 interfaces RS 232

one of these optional as RS 422/485 galvanically separated*

USB

2 interfaces USB 1.1 (bootable)

Keyboard / Mouse

Standard 6 pin MiniDIN connector (PS/2-port)
(Mouse occupied if option touch panel is selected)

Ports

Internal Cardbus

1 cardbus port for Type I/II (PCMCIA compatible)

can be used for radio transmission cards
(installation ex works possible)

PCI port*

1 x PCI port 32 bit, Rev. 2.2 compatible for ultra short card
(max. length 141 mm / 5,55 inches)

Network

RJ45

Ethernet card 10/100 MBit/s integrated on the motherboard

Wireless

Radio transmission via PCMCIA or cardbus card e.g. IEEE 802.11b

Power supply unit (internal)

AC power supply unit

110/230VAC, 100W, 50 up to 60Hz

DC power supply unit

24/48VDC, 60W and 100W, galvanically separated
Power drop up to 10VDC is bridgeable for 20 sec.

12VDC, 100W, galvanically separated
Power drop up to 5VDC is bridgeable for 20 sec. at 80 W

Power consumption

typically 30W, max. 60W, with heating option and
100W power supply unit it can be up to 100W, standby 1W

UPS storage battery unit*

24/48VDC and 12VDC power supply with 100W, occoupies PCI port

(internal)

The UPS storage battery unit is destined for short-term power failure and for transportation from one vehicle to another (max. 20 min.)

Features

Brightness control

manual

Power switch

On/Off switch of the device

Automatic switch-off *

Via ignition signal or power switch the operating system is shut down and the device is switched off, otherwise the device is switched off “hard”

Heating *

for operation from -22° F / -30° C, internal fan required
(only with CompactFlash)

Environment-Controller

functions for statistics, configuration and watchdog
(temperature, ignition, back light etc.)

Radio transmissions/ antennas*

several connector kits

Internal keyboard *

keys: F1-F12, 0-9, Dot, Backspace, Arrow keys, ESC, Enter, Page up/down, Home, End, 2 additional keys

External keyboard *

in addition to the internal keyboard applicable

Environmental specifications

Protective class

IP54 / IP65* (with correct assembly of the cable cover)

Certificates

CE/FCC Class A

Operating temperature
(733MHz CPU on request)

32° to +122°F / 0° to +50°C room
-22° to +122°F / -30° to +50°C with heating option

Storage temperature

-4° to + 140°F/ -20° to +60°C

Relative humidity

10% to 90% at 104°F/40°C, non condensing

Vibration

Class 7M3 according to EN 60721-3 (1995)
(Test acceleration 5g effective value, 10-2000Hz)

Shock

Class 7M3 according to EN 60721-3 (1995)
(Test acceleration half sine 30g peak value)